3-STAGE HVLP TURBINE

PROFESSIONAL ENTRY LEVEL.


USE TO SPRAY
  • Gloss and wood primers
  • Cellulose coatings
  • Solvent based topcoats
  • Wood preservatives and other similar coatings
  • Not suited for use with emulsions

PERFORMANCE

Nozzle           1.5mm

MWP              0.45 bar | 6.5 psi


SPECIFICATION

Cup                 1 ltr

Weight           10.34 kg


SUPPLIED COMPLETE WITH
  • Suction gun | 1.5 mm nozzle
  • 9 m hose assembly
  • Viscosity cup
  • Wrench
  • Cleaning brush

PRODUCT CODES

110 volt           10-1000

240 volt         10-1001 UK | 10-1003 AU


WARRANTY

For two years from date of purchase QTech HVLP Turbines are warranted under normal use and service against all manufacturing defects. The replacement of any and all wearing parts is not covered by this warranty. Where servicing has not been carried out at the recommended intervals this could invalidate the warranty.

https://www.sprayforthedecorator.com/wp-content/uploads/2019/01/q3-suction.jpg https://www.aristospray.com/product/qtech3-suction/?download=76
5-STAGE HVLP TURBINE

TOP-END PERFORMANCE FOR THE PROFESSIONAL.


USE TO SPRAY
  • Gloss and wood primers
  • Cellulose coatings
  • Solvent based topcoats
  • Wood preservatives and other similar coatings
  • Not suited for use with emulsions

PERFORMANCE

Nozzle           1.5mm

MWP              0.66 bar | 9.5 psi


SPECIFICATION

Cup                 1 ltr

Weight           11.16 kg


SUPPLIED COMPLETE WITH
  • Suction gun | 1.5 mm nozzle
  • 9 m hose assembly + 2 m whip
  • Viscosity cup
  • Wrench
  • Wet film gauge
  • 19 pc cleaning & maintenance kit

PRODUCT CODES

110 volt           10-1008

240 volt         10-1009 UK | 10-1011 AU


WARRANTY

For two years from date of purchase QTech HVLP Turbines are warranted under normal use and service against all manufacturing defects. The replacement of any and all wearing parts is not covered by this warranty. Where servicing has not been carried out at the recommended intervals this could invalidate the warranty.

https://www.sprayforthedecorator.com/wp-content/uploads/2019/01/q5-suction.jpg https://www.aristospray.com/product/qtech5-suction/?download=78
5-STAGE HVLP TURBINE

TOP-END PERFORMANCE FOR THE PROFESSIONAL.


USE TO SPRAY
  • Gloss and wood primers
  • Cellulose coatings
  • Solvent based topcoats
  • Wood preservatives and other similar coatings
  • Not suited for use with emulsions

PERFORMANCE

Nozzle           1.5mm

MWP              0.66 bar | 9.5 psi


SPECIFICATION

Cup                 0.6 ltr

Weight           11.16 kg


SUPPLIED COMPLETE WITH
  • Gravity gun | 1.5 mm nozzle
  • 9 m hose assembly + 2 m whip
  • Viscosity cup
  • Wrench
  • Wet film gauge
  • 19 pc cleaning & maintenance kit

PRODUCT CODES

110 volt           10-1012

240 volt         10-1013 UK | 10-1015 AU


WARRANTY

For two years from date of purchase QTech HVLP Turbines are warranted under normal use and service against all manufacturing defects. The replacement of any and all wearing parts is not covered by this warranty. Where servicing has not been carried out at the recommended intervals this could invalidate the warranty.

https://www.sprayforthedecorator.com/wp-content/uploads/2019/01/q5-gravity.jpg https://www.aristospray.com/product/qtech5-gravity/?download=80
ELECTRIC AIRLESS SPRAYER

PROFESSIONAL ENTRY-LEVEL MACHINE.


USE TO SPRAY
  • Emulsion, interior and exterior
  • Topcoats
  • Wood preservatives
  • Most other low-viscosity water or solvent based coatings

PERFORMANCE

Flow               1.9 ltr/min

Max tip           0.021”

MWP              207 bar | 3000 psi


SPECIFICATION

Motor             700 watt

Weight           11.4 kg


SUPPLIED COMPLETE WITH
  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 1/4” x 7.5m textile braided hose assembly

PRODUCT CODES

110 volt           QT190-110

240 volt         QT190-220


WARRANTY

Lifetime Motor & Gearhead WarrantyPlus

The motor and gearhead assembly are warranted to the original purchaser under normal use and service against manufacturing and material defects for the product lifetime.

1–Year Packings WarrantyPlus

Should the packings need replacing within one year of the original purchase this will be carried out at an ASC (Approved Service Centre) at no cost to the purchaser. This is limited to a one-time change only within the warranty period.

2+1 Year Defect WarrantyPlus

Additional to the Lifetime and 1–Year warranties all other components (excluding wearing parts) of QTech airless sprayers are warranted under normal use and service against manufacturing and material defects for two years from date of original purchase, extendable for a further year by registering at https://www.sprayforthedecorator.com/warrantyplus/

https://www.sprayforthedecorator.com/wp-content/uploads/2018/07/qt190-2-749x1024.jpg Paint Spray Tools,Paint World, https://www.paintspraytools.com.au/product/qtech-qp019-electric-airless-sprayer/,https://www.paintworld.com.au/collections/spray-guns/products/q-tech-qp019-220, https://www.aristospray.com/product/qtech-qt190/?download=81
ELECTRIC AIRLESS SPRAYER

USE IT ALL DAY. EVERY DAY.


USE TO SPRAY
  • Emulsion, interior and exterior
  • Topcoats
  • Wood preservatives
  • Most other low-medium viscosity water or solvent based coatings

PERFORMANCE

Flow               2.9 ltr/min

Max tip           0.027”

MWP              207 bar | 3000 psi


SPECIFICATION

Motor             1300 watt

Weight           33.0 kg


SUPPLIED COMPLETE WITH
  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 1/4” x 15m textile braided hose assembly

PRODUCT CODES

110 volt           QT290-110

240 volt         QT290-220


WARRANTY

Lifetime Motor & Gearhead WarrantyPlus

The motor and gearhead assembly are warranted to the original purchaser under normal use and service against manufacturing and material defects for the product lifetime.

1–Year Packings WarrantyPlus

Should the packings need replacing within one year of the original purchase this will be carried out at an ASC (Approved Service Centre) at no cost to the purchaser. This is limited to a one-time change only within the warranty period.

2+1 Year Defect WarrantyPlus

Additional to the Lifetime and 1–Year warranties all other components (excluding wearing parts) of QTech airless sprayers are warranted under normal use and service against manufacturing and material defects for two years from date of original purchase, extendable for a further year by registering at https://www.sprayforthedecorator.com/warrantyplus/

https://www.sprayforthedecorator.com/wp-content/uploads/2018/07/qt290-1-753x1024.jpg Paint Spray Tools,Paint World, https://www.paintspraytools.com.au/product/qtech-qp025-electric-airless-sprayer/,https://www.paintworld.com.au/collections/spray-guns/products/q-tech-qp025-220, https://www.aristospray.com/product/qtech-qt290/?download=82
ELECTRIC AIRLESS SPRAYER

HIGH OUTPUT CONTRACT WORK.


USE TO SPRAY
  • Emulsion, interior and exterior
  • Topcoats
  • Majority of high viscosity water or solvent based coatings with a solid content of up to 70%

PERFORMANCE

Flow               5.5 ltr/min

Max tip           0.031”

MWP              227 bar | 3300 psi


SPECIFICATION

Motor             1500 watt DC

Weight           59.0 kg


SUPPLIED COMPLETE WITH
  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 3/8” x 15m textile braided hose assembly
  • 1/4” x 1m textile braided whip hose

PRODUCT CODES

110 volt           QT550-110

240 volt         QT550-220


WARRANTY

Lifetime Motor & Gearhead WarrantyPlus

The motor and gearhead assembly are warranted to the original purchaser under normal use and service against manufacturing and material defects for the product lifetime.

1–Year Packings WarrantyPlus

Should the packings need replacing within one year of the original purchase this will be carried out at an ASC (Approved Service Centre) at no cost to the purchaser. This is limited to a one-time change only within the warranty period.

2+1 Year Defect WarrantyPlus

Additional to the Lifetime and 1–Year warranties all other components (excluding wearing parts) of QTech airless sprayers are warranted under normal use and service against manufacturing and material defects for two years from date of original purchase, extendable for a further year by registering at https://www.sprayforthedecorator.com/warrantyplus/

https://www.sprayforthedecorator.com/wp-content/uploads/2018/07/qt550-753x1024.jpg https://www.aristospray.com/product/qtech-qt550/download=83
ELECTRIC AIRLESS SPRAYER

MOST COATINGS, INCLUDING INTUMESCENTS.


USE TO SPRAY
  • Emulsion, interior and exterior
  • Topcoats
  • Majority of high viscosity water or solvent based coatings with a solid content of up to 70%
  • Intumescents

PERFORMANCE

Flow               6.5 ltr/min

Max tip           0.037”

MWP              227 bar | 3300 psi


SPECIFICATION

Motor             1800 watt DC

Weight           61.0 kg


SUPPLIED COMPLETE WITH
  • TriTech T360 airless spray gun
  • TriTech Contractor 517 airless tip & guard
  • 3/8” x 15m textile braided hose assembly
  • 1/4” x 1m textile braided whip hose

PRODUCT CODES

110 volt           QT650-110

240 volt         QT650-220


WARRANTY

Lifetime Motor & Gearhead WarrantyPlus

The motor and gearhead assembly are warranted to the original purchaser under normal use and service against manufacturing and material defects for the product lifetime.

1–Year Packings WarrantyPlus

Should the packings need replacing within one year of the original purchase this will be carried out at an ASC (Approved Service Centre) at no cost to the purchaser. This is limited to a one-time change only within the warranty period.

2+1 Year Defect WarrantyPlus

Additional to the Lifetime and 1–Year warranties all other components (excluding wearing parts) of QTech airless sprayers are warranted under normal use and service against manufacturing and material defects for two years from date of original purchase, extendable for a further year by registering at https://www.sprayforthedecorator.com/warrantyplus/

https://www.sprayforthedecorator.com/wp-content/uploads/2018/07/qt650-753x1024.jpg https://www.aristospray.com/product/qtech-qt650/?download=84
3-STAGE HVLP TURBINE

PROFESSIONAL ENTRY LEVEL.


USE TO SPRAY
  • Gloss and wood primers
  • Cellulose coatings
  • Solvent based topcoats
  • Wood preservatives and other similar coatings
  • Not suited for use with emulsions

PERFORMANCE

Nozzle           1.5mm

MWP              0.45 bar | 6.5 psi


SPECIFICATION

Cup                 0.6 ltr

Weight           10.34 kg


SUPPLIED COMPLETE WITH
  • Gravity gun | 1.5 mm nozzle
  • 9 m hose assembly
  • Viscosity cup
  • Wrench
  • Cleaning brush

PRODUCT CODES

110 volt           10-1004

240 volt         10-1005 UK | 10-1007 AU


WARRANTY

For two years from date of purchase QTech HVLP Turbines are warranted under normal use and service against all manufacturing defects. The replacement of any and all wearing parts is not covered by this warranty. Where servicing has not been carried out at the recommended intervals this could invalidate the warranty.

https://www.sprayforthedecorator.com/wp-content/uploads/2018/07/q3-gravity.jpg https://www.aristospray.com/product/qtech3-gravity/?download=77

1

What will you be painting?

2

How many times a week will you be using the sprayer?
Book a Service

@Aristospray

Follow us on Instagram

Web Design & Development 2b:creative. View our Privacy Policy